LUK® DMF153 Clutch Flywheel
Manufacturer #DMF153
LUK® DMF153 Clutch Flywheel
Manufacturer #DMF153
$580.38
$812.53
Save $232.15 (29%)
(13) In Stock
Get it between Thu, Aug 21 - Mon, Aug 25, 2025
Does This Fit? Add Vehicle to Guarantee Fit!
Add vehicleFast Shipping
We ship fast so you can get on the road that much faster100% Safety
Only secure payments| SKU | LKDMF153 |
|---|---|
| Brand | LUK® |
| Part Name | Clutch Flywheel |
| Part | # DMF153 |
| Quantity Per Vehicle | 1 |
| Pack of | 1 |
| Condition | New |
-
Porsche
- LuK DMF Manu
- LuK: Don’t gamble – stay with the original LuK DMF! The LuK DMF prevents damages solid flywheels may cause. The LUK Dual Mass Flywheel (DMF) is individually fine-tuned for every type of car. The risks of using solid flywheels are numerous – from increased wear of engine mounts through gearbox failure to damaged crankshafts.
| Ring Gear Major Dia. (inch) | 11.0002 |
|---|---|
| Ring Gear Major Dia. (mm) | 279.404 |
| Ring Gear Mounting O.D. (inch) | 9.9843 |
| Ring Gear Mounting O.D. (mm) | 253.6 |
| Torque Capacity DMFW (inch) | 29.5276 |
| Torque Capacity DMFW (mm) | 750 |
| Number of teeth, starter ring gear | 132 |
| I.D. for Pilot (inch) | 1.9626 |
| I.D. for Pilot (mm) | 49.85 |
| Ring Gear Number | L-01180-0033-02 |
| Bolt hole PCD crankshaft (inch) | 2.7559 |
| Bolt hole PCD crankshaft (mm) | 70 |
| Overall Casting O.D. (inch) | 11.0394 |
| Overall Casting O.D. (mm) | 280.4 |
| Ring Gear Thickness (inch) | 0.3937 |
| Ring Gear Thickness (mm) | 10 |
| Flywheel Thickness [mm] (inch) | 2.4803 |
| Flywheel Thickness [mm] (mm) | 63 |
| Flywheel friction surface outer diameter (inch) | 9.4882 |
| Flywheel friction surface outer diameter (mm) | 241 |
| Bolt hole PCD clutch pres.plte (inch) | 10 |
| Bolt hole PCD clutch pres.plte (mm) | 254 |
| Crank To Friction Surface (inch) | 2.3819 |
| Crank To Friction Surface (mm) | 60.5 |
| Ring Gear To Friction Surface (inch) | 1.811 |
| Ring Gear To Friction Surface (mm) | 46 |
| Bolt Hole Pattern | 21 |
| Cup depth, secondary flywheel (inch) | -0.0984 |
| Cup depth, secondary flywheel (mm) | -2.5 |
| Flywheel Friction Surface Inner diameter (inch) | 6.2992 |
| Flywheel Friction Surface Inner diameter (mm) | 160 |
| Crank Hole Dia. (inch) | 0.4173 |
| Crank Hole Dia. (mm) | 10.6 |
Shipping Policy
We ship fast so you can get on the road that much faster. Check out our Shipping Policy for more details.
Return Policy
We’re only happy if you’re happy. If you’re not entirely satisfied with your order, you may be entitled to a refund.
Warranty Policy
Right parts, guaranteed. If you find any defects, simply notify us within the warranty period, and we’ll take care of it. Check out our Warranty Policy for more details.
Similar Products
Recently Viewed
Sunsong®
Power Steering Return Line Hose Assembly
Get it by Thu, Aug 21 - Mon, Aug 25, 2025
