LUK® LFW192 Clutch Flywheel
Manufacturer #LFW192
LUK® LFW192 Clutch Flywheel
Manufacturer #LFW192
$71.41
$99.97
Save $28.56 (29%)
(4) In Stock
Get it between Thu, Aug 21 - Mon, Aug 25, 2025
Does This Fit? Add Vehicle to Guarantee Fit!
Add vehicleFast Shipping
We ship fast so you can get on the road that much faster100% Safety
Only secure payments| SKU | LKLFW192 |
|---|---|
| Brand | LUK® |
| Part Name | Clutch Flywheel |
| Part | # LFW192 |
| Quantity Per Vehicle | 1 |
| Pack of | 1 |
| Condition | New |
-
Jeep
- LuK Rigid Flywheel
- LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new LuK flywheel is a smart, cost-effective alternative to resurfacing. All new - never remanufactured – every component is engineered and manufactured to OE specifications, including ring gear.
| Bolt Hole Pattern | 2 |
|---|---|
| Bolt hole PCD clutch pres.plte (inch) | 11.6142 |
| Bolt hole PCD clutch pres.plte (mm) | 295 |
| Has Dowel Pins | Without dowel pins |
| I.D. for Pilot (inch) | 2.689 |
| I.D. for Pilot (mm) | 68.3 |
| Flywheel Thickness [mm] (inch) | 1.5 |
| Flywheel Thickness [mm] (mm) | 38.1 |
| Ring Gear Major Dia. (inch) | 13.8189 |
| Ring Gear Major Dia. (mm) | 351 |
| Crank Hole Dia. (inch) | 0.5512 |
| Crank Hole Dia. (mm) | 14 |
| Ring Gear Chamfer Side | Not available |
| Number of teeth, starter ring gear | 164 |
| Flywheel Friction Surface Inner diameter (inch) | 5.5906 |
| Flywheel Friction Surface Inner diameter (mm) | 142 |
| Ring Gear Thickness (inch) | 0.4429 |
| Ring Gear Thickness (mm) | 11.25 |
| Overall Casting O.D. (inch) | 13.0315 |
| Overall Casting O.D. (mm) | 331 |
| Flywheel friction surface outer diameter (inch) | 10.9449 |
| Flywheel friction surface outer diameter (mm) | 278 |
| Bolt hole PCD crankshaft (inch) | 3.7402 |
| Bolt hole PCD crankshaft (mm) | 95 |
| Crank To Friction Surface (inch) | 1.2008 |
| Crank To Friction Surface (mm) | 30.5 |
| Ring Gear Chamfer Position @ 6:00 O´clock | Not available |
| Flange Thickness (inch) | 0.439 |
| Flange Thickness (mm) | 11.15 |
| Ring Gear Mounting O.D. (inch) | 12.9134 |
| Ring Gear Mounting O.D. (mm) | 328 |
Shipping Policy
We ship fast so you can get on the road that much faster. Check out our Shipping Policy for more details.
Return Policy
We’re only happy if you’re happy. If you’re not entirely satisfied with your order, you may be entitled to a refund.
Warranty Policy
Right parts, guaranteed. If you find any defects, simply notify us within the warranty period, and we’ll take care of it. Check out our Warranty Policy for more details.
Similar Products
Recently Viewed
FCS®
Suspension Strut and Coil Spring Assembly
Get it by Thu, Aug 21 - Mon, Aug 25, 2025
