LUK® LFW142 Clutch Flywheel
Manufacturer #LFW142
LUK® LFW142 Clutch Flywheel
Manufacturer #LFW142
$51.27
$71.78
Save $20.51 (29%)
(28) In Stock
Get it between Wed, Aug 20 - Fri, Aug 22, 2025
Does This Fit? Add Vehicle to Guarantee Fit!
Add vehicleFast Shipping
We ship fast so you can get on the road that much faster100% Safety
Only secure payments| SKU | LKLFW142 |
|---|---|
| Brand | LUK® |
| Part Name | Clutch Flywheel |
| Part | # LFW142 |
| Quantity Per Vehicle | 1 |
| Pack of | 1 |
| Condition | New |
-
Ford
-
Mazda
-
Mercury
-
Merkur
- LuK Rigid Flywheel
- LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new LuK flywheel is a smart, cost-effective alternative to resurfacing. All new - never remanufactured – every component is engineered and manufactured to OE specifications, including ring gear.
| Flange Thickness (inch) | 0.6406 |
|---|---|
| Flange Thickness (mm) | 16.27 |
| Flywheel Friction Surface Inner diameter (inch) | 5.6988 |
| Flywheel Friction Surface Inner diameter (mm) | 144.75 |
| I.D. for Pilot (inch) | 1.248 |
| I.D. for Pilot (mm) | 31.7 |
| Flywheel friction surface outer diameter (inch) | 9.4488 |
| Flywheel friction surface outer diameter (mm) | 240 |
| Dowel hole diameter (inch) | 0.3091 |
| Dowel hole diameter (mm) | 7.85 |
| Crank To Friction Surface (inch) | 1.0965 |
| Crank To Friction Surface (mm) | 27.85 |
| Number of teeth, starter ring gear | 132 |
| Centering diameter / dowel hole (inch) | 9.8425 |
| Centering diameter / dowel hole (mm) | 250 |
| Overall Casting O.D. (inch) | 10.8386 |
| Overall Casting O.D. (mm) | 275.3 |
| Dowel Hole Pattern | 5 |
| Ring Gear Chamfer Side | Not available |
| Ring Gear Thickness (inch) | 0.3839 |
| Ring Gear Thickness (mm) | 9.75 |
| Bolt hole PCD crankshaft (inch) | 2.7559 |
| Bolt hole PCD crankshaft (mm) | 70 |
| Ring Gear Chamfer Position @ 6:00 O´clock | Not available |
| Ring Gear Mounting O.D. (inch) | 10.1693 |
| Ring Gear Mounting O.D. (mm) | 258.3 |
| Bolt Hole Pattern | 5 |
| Has Dowel Pins | Without dowel pins |
| Crank Hole Dia. (inch) | 0.4114 |
| Crank Hole Dia. (mm) | 10.45 |
| Ring Gear Major Dia. (inch) | 11.2705 |
| Ring Gear Major Dia. (mm) | 286.27 |
| Flywheel Thickness [mm] (inch) | 1.1811 |
| Flywheel Thickness [mm] (mm) | 30 |
Shipping Policy
We ship fast so you can get on the road that much faster. Check out our Shipping Policy for more details.
Return Policy
We’re only happy if you’re happy. If you’re not entirely satisfied with your order, you may be entitled to a refund.
Warranty Policy
Right parts, guaranteed. If you find any defects, simply notify us within the warranty period, and we’ll take care of it. Check out our Warranty Policy for more details.
Similar Products
Recently Viewed
FAG®
Wheel Bearing and Hub Assembly Repair Kit
Get it by Wed, Aug 20 - Fri, Aug 22, 2025
Meyle®
Suspension Control Arm and Ball Joint Assembly
Get it by Wed, Aug 20 - Fri, Aug 22, 2025
Motorad®
Engine Coolant Thermostat Housing Assembly
Get it by Wed, Aug 20 - Fri, Aug 22, 2025
