LUK® DMF123 Clutch Flywheel
Manufacturer #DMF123
LUK® DMF123 Clutch Flywheel
Manufacturer #DMF123
$338.43
$473.80
Save $135.37 (29%)
(32) In Stock
Get it between Wed, Aug 20 - Fri, Aug 22, 2025
Does This Fit? Add Vehicle to Guarantee Fit!
Add vehicleFast Shipping
We ship fast so you can get on the road that much faster100% Safety
Only secure payments| SKU | LKDMF123 |
|---|---|
| Brand | LUK® |
| Part Name | Clutch Flywheel |
| Part | # DMF123 |
| Quantity Per Vehicle | 1 |
| Pack of | 1 |
| Condition | New |
-
Volkswagen
-
Volvo
- LuK DMF Manu
- LuK: Don’t gamble – stay with the original LuK DMF! The LuK DMF prevents damages solid flywheels may cause. The LUK Dual Mass Flywheel (DMF) is individually fine-tuned for every type of car. The risks of using solid flywheels are numerous – from increased wear of engine mounts through gearbox failure to damaged crankshafts.
| Cup depth, secondary flywheel (inch) | -0.315 |
|---|---|
| Cup depth, secondary flywheel (mm) | -8 |
| Ring Gear To Friction Surface (inch) | 0.6299 |
| Ring Gear To Friction Surface (mm) | 16 |
| Crank To Friction Surface (inch) | 1.5827 |
| Crank To Friction Surface (mm) | 40.2 |
| Ring Gear Thickness (inch) | 0.5906 |
| Ring Gear Thickness (mm) | 15 |
| Dowel Hole Pattern | 5 |
| I.D. for Pilot (inch) | 1.2598 |
| I.D. for Pilot (mm) | 32 |
| Number of teeth, starter ring gear | 135 |
| Ring Gear Number | L-08180-0g99-06 |
| Overall Casting O.D. (inch) | 11.3386 |
| Overall Casting O.D. (mm) | 288 |
| Dowel hole diameter (inch) | 0.1969 |
| Dowel hole diameter (mm) | 5 |
| Bolt hole PCD crankshaft (inch) | 2.5984 |
| Bolt hole PCD crankshaft (mm) | 66 |
| Bolt hole PCD clutch pres.plte (inch) | 10.1575 |
| Bolt hole PCD clutch pres.plte (mm) | 258 |
| Flywheel friction surface outer diameter (inch) | 9.4488 |
| Flywheel friction surface outer diameter (mm) | 240 |
| Torque Capacity DMFW (inch) | 15.9213 |
| Torque Capacity DMFW (mm) | 404.4 |
| Flywheel Thickness [mm] (inch) | 2.8898 |
| Flywheel Thickness [mm] (mm) | 73.4 |
| Bolt Hole Pattern | 2 |
| Ring Gear Mounting O.D. (inch) | 10.2205 |
| Ring Gear Mounting O.D. (mm) | 259.6 |
| Flywheel Friction Surface Inner diameter (inch) | 6.1024 |
| Flywheel Friction Surface Inner diameter (mm) | 155 |
| Crank Hole Dia. (inch) | 0.4016 |
| Crank Hole Dia. (mm) | 10.2 |
| Centering diameter / dowel hole (inch) | 10.315 |
| Centering diameter / dowel hole (mm) | 262 |
| Ring Gear Major Dia. (inch) | 11.3924 |
| Ring Gear Major Dia. (mm) | 289.366 |
Shipping Policy
We ship fast so you can get on the road that much faster. Check out our Shipping Policy for more details.
Return Policy
We’re only happy if you’re happy. If you’re not entirely satisfied with your order, you may be entitled to a refund.
Warranty Policy
Right parts, guaranteed. If you find any defects, simply notify us within the warranty period, and we’ll take care of it. Check out our Warranty Policy for more details.
Similar Products
Recently Viewed
Four Seaso...®
HVAC Air Inlet Door Actuator Connector
Get it by Wed, Aug 20 - Fri, Aug 22, 2025
EASTERN TO...®
Get it by Wed, Aug 20 - Fri, Aug 22, 2025
