LUK® DMF062 Clutch Flywheel
Manufacturer #DMF062
LUK® DMF062 Clutch Flywheel
Manufacturer #DMF062
$267.88
$375.03
Save $107.15 (29%)
(29) In Stock
Get it between Wed, Aug 20 - Fri, Aug 22, 2025
Does This Fit? Add Vehicle to Guarantee Fit!
Add vehicleFast Shipping
We ship fast so you can get on the road that much faster100% Safety
Only secure payments| SKU | LKDMF062 |
|---|---|
| Brand | LUK® |
| Part Name | Clutch Flywheel |
| Part | # DMF062 |
| Quantity Per Vehicle | 1 |
| Pack of | 1 |
| Condition | New |
-
Acura
-
Honda
- LuK DMF Manu
- LuK: Don’t gamble – stay with the original LuK DMF! The LuK DMF prevents damages solid flywheels may cause. The LUK Dual Mass Flywheel (DMF) is individually fine-tuned for every type of car. The risks of using solid flywheels are numerous – from increased wear of engine mounts through gearbox failure to damaged crankshafts.
| Ring Gear Mounting O.D. (inch) | 10.9606 |
|---|---|
| Ring Gear Mounting O.D. (mm) | 278.4 |
| Ring Gear Thickness (inch) | 0.3543 |
| Ring Gear Thickness (mm) | 9 |
| Ring Gear To Friction Surface (inch) | 1.4094 |
| Ring Gear To Friction Surface (mm) | 35.8 |
| Flywheel friction surface outer diameter (inch) | 9.2913 |
| Flywheel friction surface outer diameter (mm) | 236 |
| Flywheel Thickness [mm] (inch) | 2.689 |
| Flywheel Thickness [mm] (mm) | 68.3 |
| I.D. for Pilot (inch) | 1.4567 |
| I.D. for Pilot (mm) | 37 |
| Crank Hole Dia. (inch) | 0.4921 |
| Crank Hole Dia. (mm) | 12.5 |
| Cup depth, secondary flywheel (inch) | -0.3071 |
| Cup depth, secondary flywheel (mm) | -7.8 |
| Bolt hole PCD crankshaft (inch) | 2.4803 |
| Bolt hole PCD crankshaft (mm) | 63 |
| Torque Capacity DMFW (inch) | 14.252 |
| Torque Capacity DMFW (mm) | 362 |
| Bolt hole PCD clutch pres.plte (inch) | 10.2362 |
| Bolt hole PCD clutch pres.plte (mm) | 260 |
| Bolt Hole Pattern | 2 |
| Dowel hole diameter (inch) | 0.2362 |
| Dowel hole diameter (mm) | 6 |
| Dowel Hole Pattern | 5 |
| Overall Casting O.D. (inch) | 12.4803 |
| Overall Casting O.D. (mm) | 317 |
| Centering diameter / dowel hole (inch) | 10.2362 |
| Centering diameter / dowel hole (mm) | 260 |
| Number of teeth, starter ring gear | 123 |
| Flywheel Friction Surface Inner diameter (inch) | 6.1024 |
| Flywheel Friction Surface Inner diameter (mm) | 155 |
| Ring Gear Major Dia. (inch) | 12.3 |
| Ring Gear Major Dia. (mm) | 312.42 |
| Crank To Friction Surface (inch) | 1.8228 |
| Crank To Friction Surface (mm) | 46.3 |
| Ring Gear Number | L-09180-0137-00 |
Shipping Policy
We ship fast so you can get on the road that much faster. Check out our Shipping Policy for more details.
Return Policy
We’re only happy if you’re happy. If you’re not entirely satisfied with your order, you may be entitled to a refund.
Warranty Policy
Right parts, guaranteed. If you find any defects, simply notify us within the warranty period, and we’ll take care of it. Check out our Warranty Policy for more details.
Similar Products
Recently Viewed
CRP®
Power Steering Return Line Hose Assembly
Get it by Wed, Aug 20 - Fri, Aug 22, 2025
