Pagid® 355125361 Disc Brake Rotor
Manufacturer #355125361
Pagid® 355125361 Disc Brake Rotor
Manufacturer #355125361
$174.86
$244.80
Save $69.94 (29%)
(27) In Stock
Get it between Thu, Aug 21 - Mon, Aug 25, 2025
Does This Fit? Add Vehicle to Guarantee Fit!
Add vehicleFast Shipping
We ship fast so you can get on the road that much faster100% Safety
Only secure payments| SKU | PA355125361 |
|---|---|
| Brand | Pagid® |
| Part Name | Disc Brake Rotor |
| Part | # 355125361 |
| Quantity Per Vehicle | 1 |
| Pack of | 1 |
| Condition | New |
-
Mercedes-benz
- Increased carbon content for increased heat conductivity and better mechanical properties
- Not oiled, no degreasing from preservative oil before fitting, saving time and money in the workshop
- Full range is 100% high carbon (GG15 & GG20)
- Full range is 100% fully coated with premium zinc rust protection
- Fixing screws are always included if required
- Manufactured according to European OE specifications (AM1 & AM2)
- Higher driving comfort with reduced machining tolerances
- Less fading and quiet braking
- HELLA PAGID Brake Discs are designed to precisely reflect the requirements of various vehicle types, brake systems, engine outputs, driving loads, and braking characteristics.
- Disc Brake Rotor
- Reduced braking noise
- Improved aesthetics and appearance of brake discs, especially when used with aluminum rims
| Hole Arrangement/Number | 05/07 |
|---|---|
| Minimum thickness [in] | 1.34 |
| Brake Disc Thickness [in] | 1.42 |
| Height [mm] | 64.5 |
| Machining | High-carbon |
| Minimum thickness [mm] | 34 |
| Supplementary Article/Info 2 | Without wheel hub |
| Brake Disc Thickness [mm] | 36 |
| Supplementary Article/Info 2 | Without wheel studs |
| Outer diameter [mm] | 360 |
| Bolt Hole Circle O [in] | 4.41 |
| Outer Diameter [in] | 14.17 |
| Centering Diameter [in] | 2.64 |
| Assy./disassy. by qualified personnel required! | . |
| Weight [kg] | 16.2 |
| Brake Disc Type | Perforated/vented |
| Technical Information Number | 55603pro_hc |
| Bolt Hole Circle O [mm] | 112 |
| Centering Diameter [mm] | 67 |
| Surface | Coated |
| Material | Gray cast iron |
| Discard Thickness (MM) | 34.00 |
| Nominal Thickness (MM) | 36.00 |
| Balancing Type | Mill balancing |
| Brake Surface Finish | Drilled |
| Disc Finish | Coated |
| Hat Finish | Coated |
| Construction | Full cast |
| Rust Resistant Coating | Yes |
| Inside Diameter | 67.0 |
| Overall Height (MM) | 64.50 |
| Outside Diameter (MM) | 360.00 |
| Mounting Bolt Hole Quantity | 7 |
| Grade Type | Regular |
| ABS Tone Ring Included | No |
| Surface Type | X drilled |
| Solid Or Vented Type Rotor | Vented |
| Bearings Included | No |
| Center Hole Diameter | 112.0 |
| Mounting Bolt Hole Circle Diameter (MM) | 112.00 |
| Directional or Non-Directional Brake Surface | Non-directional |
Shipping Policy
We ship fast so you can get on the road that much faster. Check out our Shipping Policy for more details.
Return Policy
We’re only happy if you’re happy. If you’re not entirely satisfied with your order, you may be entitled to a refund.
Warranty Policy
Right parts, guaranteed. If you find any defects, simply notify us within the warranty period, and we’ll take care of it. Check out our Warranty Policy for more details.
Similar Products
Recently Viewed
Standard®
Fuel Injection Throttle Body Mounting Gasket Set
Get it by Thu, Aug 21 - Mon, Aug 25, 2025
