Pagid® 355120771 Disc Brake Rotor
Manufacturer #355120771
Pagid® 355120771 Disc Brake Rotor
Manufacturer #355120771
$246.55
$345.17
Save $98.62 (29%)
(7) In Stock
Get it between Thu, Aug 21 - Mon, Aug 25, 2025
Does This Fit? Add Vehicle to Guarantee Fit!
Add vehicleFast Shipping
We ship fast so you can get on the road that much faster100% Safety
Only secure payments| SKU | PA355120771 |
|---|---|
| Brand | Pagid® |
| Part Name | Disc Brake Rotor |
| Part | # 355120771 |
| Quantity Per Vehicle | 1 |
| Pack of | 1 |
| Condition | New |
- Disc Brake Rotor
- Full range is 100% high carbon (GG15 & GG20)
- Manufactured according to European OE specifications (AM1 & AM2)
- Increased fuel efficiency through weight reduction by up to 20%
- Reduced braking noise
- Higher driving comfort with reduced machining tolerances
- Full range is 100% fully coated with premium zinc rust protection
- Fixing screws are always included if required
- Better handling, driving comfort and less load on suspension parts through reduction of unsprung masses
- Not oiled, no degreasing from preservative oil before fitting, saving time and money in the workshop
- Less fading and quiet braking
- Improved aesthetics and appearance of brake discs, especially when used with aluminum rims
- HELLA PAGID Brake Discs are designed to precisely reflect the requirements of various vehicle types, brake systems, engine outputs, driving loads, and braking characteristics.
- Increased carbon content for increased heat conductivity and better mechanical properties
| Brake Disc Type | Two-piece brake disc |
|---|---|
| Outer diameter [mm] | 370 |
| Technical Information Number | 65140pro_hc |
| Bolt Hole Circle O [mm] | 120 |
| Minimum thickness [mm] | 28.4 |
| Brake Disc Type | Drilled dimples |
| Brake Disc Thickness [mm] | 30 |
| Supplementary Article/Info 2 | Without wheel hub |
| Centering Diameter [mm] | 79 |
| Centering Diameter [in] | 3.11 |
| Hole Arrangement/Number | 05/06 |
| Number of bolts/screws | 1 |
| Inner Diameter [in] | 7.24 |
| Outer Diameter [in] | 14.57 |
| Wheel Bolt Bore O [mm] | 16.5 |
| Surface | Coated |
| Machining | High-carbon |
| Weight [kg] | 12 |
| Supplementary Article/Info 2 | Without wheel studs |
| Height [mm] | 73.1 |
| Brake Disc Type | Slotted/internally vented |
| Assy./disassy. by qualified personnel required! | . |
| Inner diameter [mm] | 184 |
| Brake Disc Thickness [in] | 1.18 |
| Weight [lb] | 26.46 |
| Bolt Hole Circle O [in] | 4.72 |
| Material | Gray cast iron & alum hat |
| Discard Thickness (MM) | 28.40 |
| Nominal Thickness (MM) | 30.00 |
| Balancing Type | Mill balancing |
| Brake Surface Finish | Slotted |
| Disc Finish | Coated |
| Hat Finish | Coated |
| Construction | Composite |
| Rust Resistant Coating | Yes |
| Inside Diameter | 79.0 |
| Overall Height (MM) | 73.10 |
| Outside Diameter (MM) | 370.00 |
| Mounting Bolt Hole Quantity | 6 |
| Grade Type | Regular |
| ABS Tone Ring Included | No |
| Surface Type | Slotted |
| Solid Or Vented Type Rotor | Vented |
| Bearings Included | No |
| Center Hole Diameter | 120.0 |
| Mounting Bolt Hole Circle Diameter (MM) | 120.00 |
| Directional or Non-Directional Brake Surface | Non-directional |
Shipping Policy
We ship fast so you can get on the road that much faster. Check out our Shipping Policy for more details.
Return Policy
We’re only happy if you’re happy. If you’re not entirely satisfied with your order, you may be entitled to a refund.
Warranty Policy
Right parts, guaranteed. If you find any defects, simply notify us within the warranty period, and we’ll take care of it. Check out our Warranty Policy for more details.
Similar Products
Recently Viewed
Four Seaso...®
A/C Compressor Replacement Service Kit
Get it by Thu, Aug 21 - Mon, Aug 25, 2025
Genuine®
Accessory Drive Belt Tensioner Assembly
Get it by Thu, Aug 21 - Mon, Aug 25, 2025
