Pagid® 355783491 Disc Brake Caliper
Manufacturer #355783491
Pagid® 355783491 Disc Brake Caliper
Manufacturer #355783491
$101.14
$141.60
Save $40.46 (29%)
(4) In Stock
Get it between Fri, Aug 22 - Tue, Aug 26, 2025
Does This Fit? Add Vehicle to Guarantee Fit!
Add vehicleFast Shipping
We ship fast so you can get on the road that much faster100% Safety
Only secure payments| SKU | PA355783491 |
|---|---|
| Brand | Pagid® |
| Part Name | Disc Brake Caliper |
| Part | # 355783491 |
| Quantity Per Vehicle | 1 |
| Pack of | 1 |
| Condition | New |
-
Volkswagen
- Premium surface treatment for cast iron calipers
- 100% handbrake function testing
- Audited processes
- Salt spray tests of every batch (calipers, pistons, and guide pins)
- The combined OE heritage of Hella and Pagid assures the highest level of quality and performance. New Hella Pagid brake calipers include premium accessories, including guide bolts and chrome plated pistons. Calipers are rigorously tested and include 100% end-of-line inspections, 100% low and high pressure testing, 100% handbrake functionality testing and salt spray tests for every batch produced. New brake calipers eliminate the need for core deposit and frees up cash flow and warehouse capacity.
- Disc Brake Caliper
- 100% end-of-line inspections
- Endurance/Lifetime run
- 100% pressure test (high- & low-pressure leak testing)
| Technical Information Number | An8349 |
|---|---|
| Supplementary Article/Supplementary Info | Without holder |
| Brake System | Trw |
| Assy./disassy. by qualified personnel required! | . |
| Bore O [mm] | 38 |
| Material | Grey cast iron |
| Brake Caliper Type | Fist-type caliper |
| Bore O [in] | 1.50 |
| Pad Wear Sensor Included | No |
| Inlet Thread Diameter (MM) | 9.0 |
| Mounting Hardware Included | No |
| Grade Type | Regular |
| Casting Number | N/a |
| Pads Included | No |
| Caliper Casting Material | Cast iron |
| Mounting Bolt Included | Yes |
| Bleeder Screw Included | Yes |
| Anti-Rattle Spring Included | No |
| Caliper Slides Included | Yes |
| Piston Quantity | 1 |
| Caliper Type | Floating |
| Bleeder Screw Thread Diameter (MM) | 9.0 |
| Piston Diameter (MM) | 38.0 |
| Inlet Fitting Type | M10x1 |
| Caliper Color | Gray |
| Mounting Hole Diameter (MM) | 134.0 |
| Abutment Clips Included | No |
| Mounting Bracket Included | No |
| Piston Material | Steel |
| Inlet Thread Pitch (MM) | 1.0 |
| Bleeder Screw Thread Size | M10x1 |
| Bleeder Screw Quantity | 1 |
| Bleeder Screw Thread Pitch (MM) | 1.0 |
| Caliper Finish | Powder coated |
Shipping Policy
We ship fast so you can get on the road that much faster. Check out our Shipping Policy for more details.
Return Policy
We’re only happy if you’re happy. If you’re not entirely satisfied with your order, you may be entitled to a refund.
Warranty Policy
Right parts, guaranteed. If you find any defects, simply notify us within the warranty period, and we’ll take care of it. Check out our Warranty Policy for more details.
Similar Products
Recently Viewed
Monroe®
Suspension Strut and Coil Spring Assembly
Get it by Fri, Aug 22 - Tue, Aug 26, 2025
Standard®
Engine Coolant Level Sensor Connector
Get it by Fri, Aug 22 - Tue, Aug 26, 2025
