Cardone® 18-P4768 Disc Brake Caliper
Manufacturer #18-P4768
Cardone® 18-P4768 Disc Brake Caliper
Manufacturer #18-P4768
$28.90
$40.46
Save $11.56 (29%)
(1) In Stock
Get it between Wed, Aug 20 - Fri, Aug 22, 2025
E.P.A. Compliant Converters are not legal for sale or use in California or Colorado. Restrictions apply in New York and Maine.
Does This Fit? Add Vehicle to Guarantee Fit!
Add vehicleFast Shipping
We ship fast so you can get on the road that much faster100% Safety
Only secure payments| SKU | A118P4768 |
|---|---|
| Brand | Cardone® |
| Part Name | Disc Brake Caliper |
| Part | # 18-P4768 |
| Quantity Per Vehicle | 1 |
| Pack of | 1 |
| Condition | New |
-
Chrysler
-
Dodge
-
Plymouth
- Remanufactured Unloaded Caliper w/Bracket
- Expertly remanufactured to rigorous quality and performance standards, all CARDONE Ultra Premium Calipers are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. The exclusive weather-proof silver coating effectively prevents rust and corrosion, lengthening product life and maintaining a premium appearance. All brake calipers are 100% pressure-tested to deliver consistent, industry-leading braking performance. Each unit arrives with a complete set of brand-new hardware for a sim ple, complete installation. Caliper bracket is included when applicable.
- An exclusive silver weather-proof coating that stops rust from forming, maintaining a showroom appearance.
- New stainless steel hardware clips and new mounting pins are included where applicable.
- Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
- Mounting bracket is included where applicable for a hassle-free installation.
- Pistons are durable, resistant to cracking or pitting and handle great loads.
- New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
- New bleeder screws provide trouble-free bleeding and a positive seal.
- New washers are included where applicable for a proper seal.
- A plastic cap plug protects every brake port thread to ensure a trouble free installation.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
| Abutment Clips Included | No |
|---|---|
| Anti-Rattle Spring Included | No |
| Bleeder Screw Included | Yes |
| Bleeder Screw Quantity | 1 |
| Bleeder Screw Thread Size | M10x1.0 |
| Bracket Included | No |
| Caliper Casting Material | Cast iron |
| Caliper Color | Silver |
| Caliper Finish | Powder coated |
| Caliper Slides Included | Yes |
| Caliper Type | Floating |
| Casting Number | 136826 |
| Grade Type | Regular |
| Inlet Fitting Type | Banjo |
| Inlet Thread Size | M10x1.0 |
| Mounting Bolt Included | Yes |
| Mounting Bracket Included | No |
| Mounting Hardware Included | Yes |
| Mounting Hole Diameter (IN) | 0.721 |
| Mounting Hole Diameter (MM) | 18.306 |
| Pad Wear Sensor Included | No |
| Pads Included | No |
| Piston Diameter (IN) | 2.12 |
| Piston Diameter (MM) | 53.85 |
| Piston Material | Phenolic |
| Piston Quantity | 1 |
| Rust Resistant Coating | Yes |
| 5860247 (MM) | 10.004 |
| 5860247 (IN) | 0.394 |
| 3371241 | Remanufactured |
| 60991 | Caliper; instruction sheet; hardware kit |
| 5846223 | No |
| 5880441 | No |
| 5883816 | No |
| 5880442 | No |
| 5880443 | No |
| 5880444 | No |
| 5883817 | No |
| 5883818 | No |
| 5880765 | Can i switch out a phenolic piston caliper for a steel piston caliper or vice versa? |
| 5880753 | Not recommended. the o.e. manufacturers specified steel or phenolic pistons based on the intended use of the vehicle. it is recommended that the installer follow the manufacturer’s recommendations. |
| 5880769 | What type of fluid should i use: dot 3, dot 4, or dot 5? |
| 5880757 | As a rule, always use brake fluid recommended by o.e. the fluid type is stamped on the master cylinder reservoir lid. always use new fluid in a sealed container. |
| 5880770 | Car pulls to one side during braking. why? |
| 5880758 | Inspect both calipers for binding or sticky slides or pins. also ensure that brake hoses are not collapsed or restricted and inspect steering/suspension components for proper operation. |
| 5880771 | Brakes squeal all of the time. what's causing the squeal? |
| 5880759 | Brake squeal can be caused by improper installation of the brake pads, improperly installed brake hardware and improper brake rotor finish. |
| 5880772 | Could calipers be the cause of a low brake pedal? |
| 5880760 | A symptom of a low brake pedal is usually caused by air in the system, misadjusted rear brake shoes, deteriorated brake hose(s) or a defective master cylinder. |
| 5880773 | What type of grease is used on floating caliper mounting pins? |
| 5880761 | A silicone grease is used on floating caliper mounting pins. |
| 5880774 | Do all of your calipers come with the new hardware and a mounting bracket for installation? |
| 5880762 | New hardware is included with all of our calipers however the mounting bracket is an added option depending on part number and application. mounting brackets are also sold separately for most applications. |
Shipping Policy
We ship fast so you can get on the road that much faster. Check out our Shipping Policy for more details.
Return Policy
We’re only happy if you’re happy. If you’re not entirely satisfied with your order, you may be entitled to a refund.
Warranty Policy
Right parts, guaranteed. If you find any defects, simply notify us within the warranty period, and we’ll take care of it. Check out our Warranty Policy for more details.
Similar Products
Recently Viewed
VNE®
Engine Intake Manifold Runner Control Sensor
$60.20
$84.28
Get it by Wed, Aug 20 - Fri, Aug 22, 2025
