Delphi® TC3063 Suspension Ball Joint
Manufacturer #TC3063
Delphi® TC3063 Suspension Ball Joint
Manufacturer #TC3063
$49.15
$68.81
Save $19.66 (29%)
(15) In Stock
Get it between Wed, Aug 20 - Fri, Aug 22, 2025
Does This Fit? Add Vehicle to Guarantee Fit!
Add vehicleFast Shipping
We ship fast so you can get on the road that much faster100% Safety
Only secure payments| SKU | DETC3063 |
|---|---|
| Brand | Delphi® |
| Part Name | Suspension Ball Joint |
| Part | # TC3063 |
| Quantity Per Vehicle | 1 |
| Pack of | 1 |
| Condition | New |
-
Lexus
- Delphi's OE safety technology is fitted to millions of vehicles worldwide and we apply Delphi's OE expertise to our aftermarket steering portfolio. Delphi tests to the extreme for OE performance at every turn: our parts withstand temperatures below -40 degrees C and over 120 degrees C and are exposed to 720 hours of salt spray. Delphi's extensive dimensional and material analysis ensures the very best compatibility between the OE and aftermarket part.
- Ball Joint
| Position(s) | Front right lower |
|---|---|
| California Proposition 65 | Warning: this product can expose you to chemicals including carbon black, which is known to the state of california to cause cancer. for more information go to www.p65warnings.ca.gov. |
| Material | Steel |
| Maximum Outside Diameter (IN) | 2.165 |
| Maximum Outside Diameter (MM) | 55.00 |
| Length (MM) | 231.00 |
| Length (IN) | 9.090 |
| Color | Black |
| Stud Thread Diameter (IN) | 0.49 |
| Stud Thread Diameter (IN) | 0.55 |
| Stud Thread Diameter (MM) | 12 |
| Stud Thread Diameter (MM) | 14 |
| Castle Nut Included | Yes |
| Grease Fitting Included | No |
| Suspension Grade Type | Standard |
| Dust Boot Included | Yes |
| Ball Joint Assembly | Yes |
| Width (MM) | 55 |
| Cotter Pin Included | Yes |
| Cotter Pin Hole | Yes |
| Mounting Hardware Included | Yes |
| Washers Included | No |
| Height (IN) | 3.941 |
| Height (MM) | 100.10 |
| Nuts Included | Yes |
| Mounting Hole Quantity | 2 |
| Adjustable | No |
| Greaseable | No |
| Stud Thread Length (IN) | 0.8 |
| Stud Thread Length (IN) | 0.82 |
| Stud Thread Length (MM) | 20.5 |
| Stud Thread Length (MM) | 21 |
| Stud Type | Threaded |
| Mounting Type | Bolt-in |
| Distance Between Mounting Holes (MM) | 125.00 |
| Dust Boot Material | Rubber |
| Mount Plate Included | No |
| Tapered Stud | Yes |
| Stud Tapered End 2 Diameter (IN) | 0.59 |
| Stud Tapered End 2 Diameter (IN) | 0.82 |
| Stud Tapered End 2 Diameter (MM) | 15 |
| Stud Tapered End 2 Diameter (MM) | 21 |
| Stud Tapered End 1 Diameter (IN) | 0.54 |
| Stud Tapered End 1 Diameter (IN) | 0.68 |
| Stud Tapered End 1 Diameter (MM) | 13.9 |
| Stud Tapered End 1 Diameter (MM) | 17.5 |
| Stud Thread Pitch (MM) | 1.25 |
| Stud Thread Pitch (MM) | 1.5 |
Shipping Policy
We ship fast so you can get on the road that much faster. Check out our Shipping Policy for more details.
Return Policy
We’re only happy if you’re happy. If you’re not entirely satisfied with your order, you may be entitled to a refund.
Warranty Policy
Right parts, guaranteed. If you find any defects, simply notify us within the warranty period, and we’ll take care of it. Check out our Warranty Policy for more details.
Similar Products
Suspensia®
Suspension Control Arm and Ball Joint Assembly
Get it by Wed, Aug 20 - Fri, Aug 22, 2025
Skyward®
Suspension Control Arm and Ball Joint Assembly
Get it by Wed, Aug 20 - Fri, Aug 22, 2025
Moog Quick...®
Suspension Control Arm Bushing Kit
Get it by Wed, Aug 20 - Fri, Aug 22, 2025
Mevotech®
Suspension Stabilizer Bar Link Kit
Get it by Wed, Aug 20 - Fri, Aug 22, 2025
Recently Viewed
